
Add to Cart
OM3, OM4 3.0mm, 3.6mm Round Cable 400G 16F MPO Pre-terminated Jumper Cable
Basic Information:
The OSFP-SR8 or MPO jumper with the 16F MPO connector is used for the connection between the OSFP-SR8 400G optical transceiver module in the data center.
It can fully meet the harsh high-speed network with Low insertion loss, high return loss by using the high-quality cable and MPO components.
With high performance and ingrained simplicity, our Light-LINKSTM low-loss MPO Trunks are the foundation of simpler, faster, and superior pre-terminated fiber connectivity solutions supporting the data center.
Features&Benefits:
Specifications and Parameter:
16F MPO Fiber Optic Performance:
MPO Connector | Standard Sm | Low Loss Sm | Standard Mm | Low Loss Mm | |
Insertion Loss | Typical(dB) | 0.35 | 0.2 | 0.35 | 0.2 |
Maximum(dB) | 0.75 | 0.35 | 0.6 | 0.35 | |
Return Loss (dB) | ≥60 for APC (8 angle polish) | ≥20 for PC | |||
≥50 for PC | — | ||||
Male/Female(dB) | Male:with pins,Female:without pins | ||||
Tensile Strength (dB) | ≤0.3 ( max 66N ) | ||||
Vibration (dB) | ≤0.3 ( 10-55Hz ) | ||||
Thermal Cycle (dB) | ≤0.3 (-40~75℃, 21cycles) |
Geometric parameter of end-face:
Item | Spec | ||||
SM | MM | ||||
RX(mm) | MIN 2000 | ||||
RY(mm) | MIN 5 | ||||
Fiber Height (nm) | 1000-3500 | ||||
Max. diff. Height all (nm) | MAX: 500 | ||||
Max. diff. Height adj (nm) | MAX: 300 | ||||
X-Axis Angle ( °) | -0.2 ~ 0.2 | ||||
Y-Axis Angle ( °) | PC: -0.2 ~ 0.2 APC: 7.8 ~ 8.2 | -0.2 ~ 0.2 | |||
Core Dip | N/A | -100 ~ 200 |
Ordering Information:
MPO | -XX | -XX | -XX | -X | -XX | -X | -XX |
A1: G657A1 A2: G657A2 M3: OM3 M4: OM4 M5: OM5 | LZ: LSZH NP: OFNP NR: OFNR | FF: MPO /MPO(female to female ) MF: MPO/MPO (male to a female) MM: MPO/MPO (male to male) | L: Low loss B: Standard loss | 12:1×12 core 48:4×12 core 72:6×12 core 96:8×12 core | A: TIA568 through-type B: TIA568 Reverse type C: TIA568 cross-type | 5M to 50M | |
Gender Type | Housing color | Ferrule | Connector loss standard | Fiber cores | Polarity | Fiber length |
16F Pre-terminated Jumper Cable Application:
Geehe's Standards Compliance :